|
SYSTEM OVERVIEW |
|
System overview:
|
900VA line-interactive
UPS, large LCD volt
meter with dimmer switch
and UPS function
indicators, plus UPS and
surge-only outlets
|
|
Voltage
compatibility:
|
120
|
|
Frequency
compatibility:
|
60
|
|
OUTPUT |
|
Output volt amp
capacity (VA):
|
900
|
|
Output watt
capacity (watts):
|
475
|
|
Output nominal
voltage:
|
120VAC
|
|
Output voltage
regulation:
|
BATTERY MODE: PWM sine
wave 115V +/-5%
|
|
Output frequency
regulation:
|
LINE MODE: Passes line
frequency of 60Hz +/-10%
BATTERY MODE: Inverter
output regulated to 60Hz
+/-0.5Hz
|
|
Outlet quantity
/ type:
|
8 NEMA 5-15R
|
|
INPUT |
|
Maximum input
amps:
|
12a
|
|
Input connection
type:
|
NEMA 5-15P , right angle
plug
|
|
Input cord
length:
|
6 ft. / 1.8 m
|
|
Recommended
electrical service:
|
120V 15A
|
|
BATTERY |
|
Full load
runtime:
|
3 minutes (900VA / 475
watts)
|
|
Half load
runtime:
|
10 minutes (450VA / 237
watts)
|
|
DC system
voltage:
|
12VDC
|
|
Typical battery
lifespan:
|
4-6 years (depending on
usage)
|
|
VOLTAGE REGULATION |
|
Voltage
regulation description:
|
Line interactive voltage
regulation corrects
brownouts as low as 89V
back to usable values
|
|
Direct pass
through:
|
Voltages of 105V and
greater are passed
through to connected
equipment unchanged
|
|
Brownout
correction:
|
Input voltages between
89 and 104 are boosted
by 14%
|
|
LEDS ALARMS &
SWITCHES |
|
Front panel
LEDs:
|
Front panel LCD screen
with blue backlight and
dimmer switch offers
continuous input line
voltage data, plus UPS
status information on
line power status,
battery power status,
battery charge level and
voltage regulation
operation
|
|
Alarms:
|
Audible alarm with 15
second delay sounds to
indicate loss of utility
power. Alarm can be
silenced by pressing
front panel alarm cancel
button. Once silenced,
alarm will re-sound when
approximately 2 minutes
runtime remain.
|
|
Switches:
|
Includes 2 front panel
switches - one main
on/off power switch and
one dual function "alarm
cancel" / "self test"
button
|
|
SURGE / NOISE
SUPPRESSION |
|
AC surge
suppression:
|
480 joules
|
|
AC suppression
response time:
|
Instantaneous
|
|
Dataline
suppression:
|
-
|
|
EMI / RFI AC
noise suppression:
|
Yes
|
|
PHYSICAL |
|
Shipping weight
(lbs):
|
15.6
|
|
Shipping weight
(kg):
|
7.1
|
|
Unit weight
(lbs):
|
14.6
|
|
Unit weight
(kg):
|
6.6
|
|
Unit Dimensions
(HWD/in):
|
Tower format: 12 x 3.5 x
6.5 / Rackmount Shelf
format: 3.5 x 12 x 6.5
|
|
Unit Dimensions
(HWD/cm):
|
Tower format: 30.5 x 8.9
x 16.5 / Rackmount Shelf
format 8.9 x 30.5 x 16.5
|
|
Shipping
Dimensions (HWD/in):
|
6.5 x 15.5 x 11
|
|
Shipping
Dimensions (HWD/cm):
|
16.5 x 39.4 x 27.9
|
|
Material of
construction:
|
ABS
|
|
Form factors
supported:
|
Rack/Tower
|
|
Cooling method:
|
Convection
|
|
ENVIRONMENTAL |
|
Operating
Temperature:
|
+32 to +104 degrees
Fahrenheit / 0 to +40
degrees Celsius
|
|
Storage
Temperature:
|
+5 to +122 degrees
Fahrenheit / -15 to +50
degrees Celsius
|
|
Relative
Humidity:
|
0 to 95%, non-condensing
|
|
COMMUNICATIONS |
|
Network
monitoring port:
|
USB (HID)
|
|
Software and
cabling included:
|
PowerAlert software
available for free
download at
www.tripplite.com (user
supplies USB cable)
|
|
WatchDog
compatibility:
|
Yes, compatible with
Tripp Lite's Watchdog
system service to
restore operation to
locked equipment through
soft reboot of
application / OS or hard
power off/on reboot of
connected equipment —
ideal for unattended
kiosk applications
|
|
LINE / BATTERY
TRANSFER |
|
Transfer time
from line power to
battery mode:
|
2-4 milliseconds
|
|
Low voltage
transfer to battery
power:
|
Switches to battery
power as line voltage
decreases to 89V or
less, switches back to
AC mode as line voltage
increases to 94V or
higher
|
|
High voltage
transfer to battery
power:
|
Switches to battery mode
as line voltage
increases to 139V or
higher, switches back to
AC mode as line voltage
decreases to 135V or
lower
|
|
CERTIFICATIONS |
|
Certifications:
|
Tested to UL1778 (USA),
CSA C22.2 No. 107.3
(Canada), NOM (Mexico),
Class B (Emissions)
|
|
WARRANTY |
|
Product
warranty:
|
2 year product warranty
|
|
Connected
equipment insurance (USA
and Canada Only):
|
$200,000 connected
equipment insurance (USA
and Canada only)
|
|
Optional
coverage:
|
3 Year: WEXT3-OMNI, 5
Year: WEXT5-OMNI
|
|
SPECIAL FEATURES |
|
Cold Start:
|
Yes, inverter can be
"cold started" to enable
temporary AC output
during a power failure
|
|
Appearance:
|
Attractive black color
scheme
|
