Power Factor Inc. - 800-706-7009
www.powerfactorincdirect.com
|
Power Factor Inc. - 800-706-7009 www.powerfactorincdirect.com |
|
Find the battery you want at the right price @ batteries asap!
A+ Rating with the Better Business Bureau
|
Power Factor Inc. is an Eaton Powerware authorized reseller. For information, quote, or to order the Powerware BladeUPS call us at 800-706-7009.Click here for replacement batteries at our new online store batteriesasap.com Quick turnaround on quotes, Competitive pricing, Fast delivery and Great Customer service!
BladeUPS Power System
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The
Powerware BladeUPS is a revolutionary
power quality solution, expanding power
protection from 12 kW to 60 kW in a
single industry standard 19-inch rack,
and most significantly, providing this
robust, compact solution without
generating the additional heat
associated with legacy end-of-row,
modular UPS products. The Powerware
BladeUPS is designed to be the most
flexible UPS on the market. It can be
deployed in a number of configurations
from a distributed architecture (one in
every rack), to end of row (up to six
units in a rack), to a central system
(not on the IT floor, but in the
electrical closet). In addition, the
exceptionally high efficiency rating is
not a large energy cost burden when
installed inline with the output of a
large, central UPS or in highly critical
computing areas where dual UPS
redundancy (2N) is required. |
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||||||
General Characteristics |
||
| Power Rating | 12 kW per UPS Module | |
| Efficiency | Up to 97% | |
| Heat Dissipation | <371W/1266 BTU/hr. at 100% rated load | |
| Cooling | Fan cooled, temperature microprocessor monitored; front air entry, rear exhaust | |
| Audible Noise, Normal Operation | 58 dBA at 1 meter | |
| Altitude | 1000 meters (3300 ft. ASL) | |
Input Characteristics |
||
| Input Voltage | 208 Vac and 400 Vac models | |
| Voltage Range |
208V model: 180 to 255 Vac 400V model: 311 to 519 Vac |
|
| Frequency Range | 50 or 60 Hz, ±5 Hz, auto detecting | |
| Input Current Distortion | <5% with IT loads (PFC power supplies) | |
| Input Power Factor | >.99 with IT loads (PFC power supplies) | |
| Inrush Current | Load dependent | |
| Input Requirements | Three-phase, four wire + ground | |
| Bypass Source | Same as input, (single feed) | |
| Generator Compatibility | Fast sync slew rate for optimum generator operation | |
Output Characteristics |
||
| Rated Output Voltage |
208V model: Programmable 180 to 229 Vac, Ph to Ph (standard) 187 to 229Vac ph to jph (ITEC optimized) 400V model: 180 to 240 Vac, Ph to N |
|
| Output Configuration | Three-phase, four wire + ground | |
| Output Frequency (nominal) | 50 or 60 Hz auto-detection on startup | |
| Frequency Regulation | 0.1 Hz free running | |
| Load Power Factor Range |
Lagging: 0.7 Leading: 0.85 |
|
|
Total Output Voltage Distortion |
<3% with IT loads (PFC power supplies) <5% non-linear or non-PFC power supplies |
|
Battery Characteristics |
||
| Battery Type | VRLA - AGM | |
| Battery Runtime (Internal) |
13.6 minutes at 50% load 4.7 minutes at 100% load |
|
| Battery String Voltage | 240 Vdc (Internal redundant strings in each module) | |
| Battery Test |
Automatic battery test standard (remote scheduling capable). Manual battery test from front display |
|
| Battery Recharge Profile |
ABM Technology. Advanced three-stage charging technique |
|
| Battery Cut-off Voltage |
Variable from 1.67 VPC at <5 min. runtime to 1.75 VPC at >90
min. runtime |
|
| Battery Low Condition | Announced with alarm | |
| Battery Load Share | Yes: based on battery voltage during discharge. Load shifted to systems with strongest batteries to give longest runtime for battery condition | |
| Extended Battery Capability |
Yes, add up to four additional 3U battery enclosures >34 min
at 100% load, >1 hour at 50% load) |
|
Physical Characteristics |
||
|
Dimensions (HxWxD) Installed Shipped EBM |
10.5 (6U) x 17.4 x 26.0 inches 266 x 438 x 660mm 27 x 39 x 46 inches 686 x 991 x 1168 mm 5.2 (3U) x 17.2 x 26 inches 132 x 437 x 660 mm |
|
|
Note: Total Chassis Weight without batteries or electronics Total Chassis Weight with batteries or electronics |
100 lb. (46 kg) 307 lb. (140 kg) |
|
| Total UPS Weight without Batteries | 135 lb. (61 kg) | |
| Total UPS Weight with Batteries | 307 lb. (140 kg) | |
| EBM Weight | 170 lb. (77 kg) | |
Communications and User Interface |
||
| Software Compatibility |
UPS ships with Software Suite CD containing LanSafe power management software and trial version of PowerVision |
|
| X-Slot® Bays | Two available for the cards listed below | |
| Optional X-Slot Communication Cards | Application | Powerware Card |
| WEB - TCP/IP | ConnectUPS-X Web/SNMP Card | |
| Modbus® RTU | Modbus Card | |
|
IBM eServer™ (i5™, iSeries™, or AS/400®) |
Relay Interface Card | |
|
N/O, N/C (dry contacts) |
Industrial Relay Card | |
| Parallel | Powerware Hot Sync CAN Bridge Card | |
| Remote Monitoring | Modem card | |
| Power Xpert® Gateway Series 2000 Card | ||
| Control panel LCD |
Two lines by 20 characters Four menu-driven interface buttons Four status at a glance LEDs |
|
| Multi Language |
Standard: English, Spanish, French, German, and Portuguese Available: Finnish, Norwegian, Swedish, Russian, Hungarian, Polish, Romanian, Czech, Danish, Greek, Turkish, Bulgarian, Korean, and Chinese |
|
| Configuration Changes |
User capable, firmware auto configures. Online firmware updates available for operational changes |
|
| Dry Contact Inputs | Two, user configurable | |
| Dry Contact Outputs | One, user configurable | |
Service |
||
| Installation | User capable, located in the IT racks, operational factory service available | |
| Preventative Maintenance | User capable, optional factory service available | |
| Corrective Maintenance | User capable, optional factory service available | |
| Serviceability Features |
Hot-swappable batteries Hot-swappable electronics module Automated internal maintenance bypass Auto-configure firmware Flash firmware upgradeable |
|
Certifications |
||
| Safety |
208V model: UL1778, cUL 400V model: CE |
|
| EMI |
208V model: FCC Part15 Class A 400V model: EN62040-2 Class A |
|
| Surge Protection | ANSI C62.41, Cat B-3 | |
| Hazardous materials (RoHS) | Complies per EU Directive 2002/95/EC Category 3 (4 of 5) | |
| Warranty | ||
| Standard | 12 months from install / 18 months from shipment | |
| Warranty Repair | Factory depot repair or replace | |
Service Support Agreements2 |
||
| Depot | PowerTrust Express | |
| On-site 5x8 | PowerTrust Value | |
| On-site 7x24 | PowerTrust eight-, six- or two-hour response | |
Options and Accessories |
||
| Detachable input cord | ||
| Detachable input/output cord assembly | ||
| Detachable paralleling cord assembly | ||
| Extended Battery Modules (EBM) | ||
| 3U output sub-distribution modules (RPM) | ||
| 0U to 3U rack power strips | ||
| 60 kW Powerware BladeUPS Parallel bar | ||
| Environmental Monitoring Probe (EMP) for temperature and humidity monitoring | ||
| X-Slot Communication Cards (see Communications and User Interface above) | ||
| Remote monitoring service by Eaton: eNotify; requires purchase of Web Card and Environmental Monitoring Probe | ||
Buy batteries on-line and get it fast!
|
Power Factor Inc. / Batteries ASAP! 2526 Manana Suite 102 Dallas, Texas 75220 800-706-7009 Established 1996 While every precaution has been
taken to ensure accuracy and completeness in this literature, Power Factor Inc.
assumes no responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions. Specifications
subject to change without notice. |
