Cut Sheets and I&O Manual pdf downloads below:

TS Single Cell Specs      TS Monobloc Specs              TS/TSB Series I&O Manual

Standard Features

·         Cell type:                                    Flooded lead acid

·         Design life:                                  15-20 years at 20°C float

·         Grids:                                         Positive – tubular lead antimony/selenium

 Negative – pasted lead antimony

·         Container and cover:                     SAN, FR cover available

·         Terminals:                                   Internally threaded for M10 bolt.

·         Torque for terminals:                     25 Nm/222 in. lbs

·         Post seal:                                   EPDM

·         Jar to cover seal:                         Heat bonded

·         Separators:                                 PVC vipla, sleeved around the positive plate

·         Intercell connectors:                     Insulated copper

·         Watering interval:                         2-3 years in float applications at 25°C

·         Sediment space:                          0.6 inches/15 mm minimum

·         Operating temperature:                 -20°C / -5°F to +60°C / +140°F

·         Self discharge rate:                      < 3% per month @ 20°C / 68°F

·         Electrolyte density, fully charged:   1.240

·         Float voltage:                              2.23 vpc

·         Equalize voltage:                          2.38 vpc

·         Dry charged batteries:                  Available

·         Cycle capability:                          80% DOD – 1200

50% DOD – 2500

25% DOD – 4000

·         Racks:                                       Available in many styles, also seismic

·         Spill containment:                        Available in many designs

·         Chargers:                                   Available for switchgear and UPS

·         Battery monitoring:                      Available

Accessories                                                                                                                                                         

Standard

• Battery inter unit and inter row connections
• Terminal hardware
• Hydrometer with holder and drip cup
• Vent mounted thermometer
• Cell numbers
• Lifting strap
• Flame arresting vent caps
• No-ox or similar grease
• Installation and operating instructions/drawing

Optional

• Racks
• Teminal lugs
• Hydrogen detector
• Eyewash
• Shower
• Electrolyte absorbent / neutralizing material
• Spill containment systems
• Battery monitoring systems
• Chargers