Dynasty C&D Battery UPS12-475

Dynasty C&D Battery Johnson Control UPS12-475 & UPS12-475FR have been replaced by the UPS12-490MR

Click here to purchase the replacement UPS12-490MR Battery from our online store at batteriesasap.com

UPS12-475
Valve Regulated Lead Acid Battery
for UPS standby power applications
12V 134 AH @ 20 hr rate,
12V 475 watts/cell @ 15 min. rate

UPS12-475
Valve Regulated Lead Acid Battery
for UPS standby power applications
12V 134 AH @ 20 hr rate,
12V 475 watts/cell @ 15 min. rate

FEATURES

Flame-arresting one-way pressure-relief vent for safety and long life.
Thermally welded case-to-cover bond to eliminate leakage.
Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance.
Computer-generated grid design optimized for high power density.
UL-recognized component.
Multicell design for economy of installation and maintenance.
Can be mounted in any orientation. Upright, side or end mounting recommended.
Not restricted for air transport – Complies with IATA/ICAO Special Provision A67.
Not restricted for surface transport – Classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189.
Computer designed lead, low calcium alloy grid for minimal gassing and ease of recycling.
Case and cover available in both standard and flame retardant polypropylene.
Flame retardant polypropylene case and cover compliant with UL 1778 (optional).

*All dimensions in inches and (millimeters). All dimensions are for reference only. Contact a C&D Representative for complete dimensional information.

UPS12-475 - Specifications
Cells Per Unit	Voltage Per Unit	Weight	Electrolyte	Maximum Discharge Current	Short Circuit Current	Ohms Imped. 60 Hz
6	12.84	100lbs. 45 kg.	Absorbed H₂SO₄ SG = 1.300	800 Amps	5000 Amps @ 0.1 sec.	0.0023 Ohms
Capacity			475 watts per cell at the 15 minute rate to 1.67 volts per cell at 77°F (25°C).
			134 Ah @ 20 hr. rate to 1.75 volts per cell @ 77°F (25°C).
			122 Ah @ 10 hr. rate to 1.80 volts per cell @ 20°C (68°F).
Operating Temperature Range			Discharge; -40°F (-40°C) to +160°F (71°C).		Charge; -10°F (-23°C) to +140°F (60°C). (with temperature compensation)
Nominal Operating Temperature Range			+74°F (23°C) to +80°F (27°C).
Float Charging Voltage			13.5 to 13.8 VDC/unit Average at 77°F (25°C).
Recommended Maximum Charging Current Limit			C/5 amperes (27 amperes @ 100% depth of discharge).
Equalization and Cycle Service Charging Voltage			14.4 to 14.8 VDC/unit Average at 77°F (25°C).
Maximum AC Ripple (Charger)			0.5% RMS or 1.5% P-P of float charge voltage recommended for best results.
			Maximum voltage allowed = 1.4% RMS (4%P-P).
			Maximum current allowed = 6.7 amperes (C/20).
Self Discharge			Dynasty UPS batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required. For higher temperatures the time interval will be shorter.
Accessories			Inter unit connectors, racks and cabinet systems are available.
Terminal			Threaded brass inserts to accept 0.25" (6mm) bolt.
Terminal Hardware Torque			110 in.-lbs. (12.4 N-m)

Note:

Batteries to be mounted with 0.5 in. spacing minimum and free air ventilation. Specifications subject to change without notification.

Buy batteries on-line and get it fast!

UPS Technology
Power Problems
UPS Systems
XPCC
Powerware
Minute Man
Tripp-Lite
Emerson Liebert
GE Industrial
SLA Batteries
CSB
MK Battery
Powersonic
Rhino
Universal
EnerSys
Panasonic
Power Patrol
Big Beam
SENS
Legacy
GS
Gates Hawker
C&D Dynasty
Power Battery
Contact Us
Links

Home Up UPS Technology Power Problems UPS Systems XPCC Powerware Minute Man Tripp-Lite Emerson Liebert GE Industrial SLA Batteries CSB MK Battery Powersonic Rhino Universal EnerSys Panasonic Power Patrol Big Beam SENS Legacy GS Gates Hawker Power Battery Contact Us Links

Power Factor Inc. / Batteries ASAP!

2526 Manana Suite 102 Dallas, Texas 75220

800-706-7009

Established 1996

While every precaution has been taken to ensure accuracy and completeness in this literature, Power Factor Inc. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners.

Dynasty C&D Battery UPS12-475

Dynasty C&D Battery Johnson Control UPS12-475 & UPS12-475FR have been replaced by the UPS12-490MR

UPS12-475 Valve Regulated Lead Acid Battery for UPS standby power applications 12V 134 AH @ 20 hr rate, 12V 475 watts/cell @ 15 min. rate

UPS12-475
Valve Regulated Lead Acid Battery
for UPS standby power applications
12V 134 AH @ 20 hr rate,
12V 475 watts/cell @ 15 min. rate